Meeting the challenges of today’s patient rooms
Basic Headwall supports all of the essential patient room clinical functions and acuity needs from ICU to Med-Surg
- Gas, power, data and communications
- Scalable to any acuity need
- Services ergonomically positioned to reduce reaching and bending
- Mounting tracks for adding and positioning equipment and devices
Ease of Installation/ Durability/ Cleanability
Basis Headwall was designed to simplify the time and complexity of designing and installing a patient room headwall by providing a factory tested pre-plumbed, pre-wired medical headwall ready to be installed by a general contractor.
- Minimum brazing and conduit connections
- In-Wall & On-Wall options for new construction or renovations
- Durable steel frame and panel construction
- Easy to clean, face plate free linear design
Design & Aesthetic Options
Basis Headwall provides a simple, clean linear look easily tailored to hospitality designs while providing a clinically robust medical headwall.
- Available with commercially available HPL
- Space saving, flush In-Wall option (Double sided or single sided)
- A selection of vertical and horizontal configurations, heights and widths
- Solid wood or anodized aluminum trim
Smart, durable, easy to install, simple to clean and accommodates all beds
As anyone in the healthcare business knows, construction dollars are hard to come by. The Hill-Rom® Bed Locator maximizes your investment by providing hospital bed wall protection. Patients and beds are getting bigger and heavier which leads to even more damage to unprotected walls and structures.
The Hill-Rom® Bed Locator was specifically designed to meet these new challenges. The Hill-Rom® Bed Locator’s shoulder-less design accommodates the trend toward increasingly wider, bariatric beds and still delivers data and electric to the head of the bed where you need it. With sides angled at 45 degrees, the Hill-Rom® Bed Locator not only provides hospital bed wall protection it also helps prevent damage to cords and connections during high-low positioning of the bed. The durable, two-piece design is simple for contractors to install and the outer shell is seamless so the Hill-Rom® Bed Locator is easy to clean.
Did we mention the Hill-Rom® Bed Locator is smart? When integrated with the Hill-Rom® Patient Light, it will automatically shut off power to the bed in the event an IV pole comes in contact with the light, reducing the risk of property damage and protecting you and your patients. Smart, durable, easy to clean and inclusive of bariatric beds – the Hill-Rom® Bed locator is the natural choice for your patient environment.
|Dimensions (w x h)||50″ x 22.5″|
|Depth at bumpers||4.6″|
|Depth at center||2.76″|
Ideal mobile storage solution for critical patient care
The Critical Care Cart is a mobile work center and cart designed for easy supply and equipment storage. This hospital cart is the ideal solution for caregivers working in critical care and most other areas throughout the healthcare facility. It is durable, easy to move and features locking casters for stability. The top shelf has a convenient work surface. The exposed edges are surrounded by a galley rail/grab bar for protection and mobility.
A unique system of storage components mount on the front and rear of the cart and can be repositioned to fit a wide range of storage requirements. The baskets on the front of the cart can pivot out for easy access to medical equipment and supplies. Plus, all the components are removable for easy cleaning.
A flexible solution for rapidly changing patient environments
Movable Gas Outlets – With the unique feature of movable gas outlets, the staff can react to specific patient situations with minimal concerns for improperly placed gas outlets.
Equipment Organization – The Horizon® system reduces clutter around the bed and improves equipment organization and layout.
Easily Upgradeable – The room can be upgraded to a higher acuity level with minimal downtime and inconvenience, allowing for additional services to be accepted without the need to break into walls or reconstruct the room.
High illumination for your care environment
The Integris® light solutions, Lite Rail and Specialite bathe the patient room in bright, warm fluorescent light. With a body frame made from extruded aluminum with die-cast end caps, the Integris patient light is housed in a high-impact acrylic lens.
The patient light is equipped with an emergency shut-off switch that cuts off power to the bed when an IV pole or other equipment makes contact with the light, helping you avoid costly repairs to the wall or medical equipment.
An accessory Lite Rail can provide additional electrical outlets to manage medical equipment located near the bed. The care environment can be further enhanced by a Specialite, which features decorative laminate color panel inserts that may be changed to suit the color scheme of the patient room.
An ergonomic and safe design
The Hill-Rom® Medical Headboard’s hospitality-inspired design helps you achieve your design objectives while safely and ergonomically delivering data and electrical services to the patient care arena. Its ergonomic design accommodates bariatric beds, protects your walls and permits you to integrate virtually any color or design in the hospital bed headboard.
The hospital headboard can be equipped with normal power, emergency power and low voltage (data) provisions. The Hill-Rom Medical Headboard also has angled sides to enhance access to services while helping prevent damage to cords and connections during the administration of patient care. Durable and easy to install, the Hill-Rom Medical Headboard’s single outer section is robust, seamless and easy to clean.
|Dimensions (w x h)||50″ x 36.9″|
|Depth at bumpers||4.6″|
|Depth at center||2.76″|
Lighting systems for patient rooms
There are a number of reasons you might seek a ceiling mounted overbed lighting solution. Perhaps you need space on a headwall for accessories or equipment, maybe you need to protect your lighting from the “up/down” travel of today’s high-tech bed solutions or perhaps you’ve employed an ergonomic boom arm solution such as our Latitude system. Regardless of the reason, the Hill-Rom OverBed Light has you covered.
Clean, brilliant light delivered in a thoughtful overbed lighting solution that meets the needs of patients, clinicians and hospital engineering departments everywhere.
Clean, Brilliant Light — Glare-free light delivered to the patient care arena where you need it and as you need it. With three lights in one thoughtfully designed fixture, the OverBed Light integrates easily into your room planning and saves money by consolidating your lighting needs into one centrally located fixture. The optional low voltage controller can be mounted on the hospital overbed lighting fixture to facilitate patient control of ambient / reading illumination with a bed or pillow speaker. Healthcare providers can have easy control access at the wall or bed.
Three Function Task Lighting — The Hill-Rom OverBed Light provides patient reading, room ambient and patient examination lighting in one fixture. The OverBed Light features an optional chart and LED nightlight, which is why you often hear this overbed light referred to as the “five function” light.
Easy To Clean and Service — The OverBed Light has an antimicrobial polyester powder coating that stands up to toughest cleaning protocols and promotes a clean patient environment. The IP65 ingress barrier door, seals against dust, dirt and moisture and provides easier maintenance. The shielded lamp design of the OverBed Light keeps the lamp from retaining dust. For superior cleaning and protection, the optional ingress barrier seals the light and protects the patient environment from lingering dust or particulate matter.
Easy To Install — The simple, robust one piece hospital overbed lighting unit is designed for lay-in and hard ceilings. It drops into a tee grid for easy installation.
Full access to the patient for caregivers
Hill-Rom power columns offer 360° access to patients. The columns allow caregivers to move freely around the bed, including the critical area around the head of the patient. Free of the wall, the bed can be pivoted around to allow the patient to see out the window or watch television, all without disturbing vital services.
|Power Column||23.125″ W x 7″ D|
|Small Power Column||15.125″ W x 7″ D|
|Floor Space (Base)|
|Power Column||21.5″ W x 6″ D|
|Small Power Column||13.5″ W x 6″ D|
|Power Column||23.25″ W x 10.5″ D|
|Small Power Column||15.25″ W x 10.5″ D|
|Floor to Ceiling||8’0″– 9’6″ in 1″ increments|
Glare-free light for the patient care environment
The Hill-Rom Task Light is a recessed, ceiling-mounted medical lighting system designed to brilliantly illuminate the patient care arena. The hospital lighting system is intended to be used in combination with ambient and/or reading light.
With the medical light fixtures installed in pairs on either side of the bed and featuring high output T5 lamp technology and two lamps per fixture, the Hill-Rom task light easily generates more light than any ceiling mounted “5-in-1” type solution.
Asymmetric light distribution technology provides even head-to-toe illumination and because of the dual light configuration, care giver shadows are virtually eliminated.
Clean, Brilliant Light — Abundant glare-free light delivered to the patient care arena where you need it and as you need it.
Easy To Clean and Service — Hill-Rom’s hospital lighting system, the Task Light, comes standard with an antimicrobial polyester powder coating that stands up to toughest cleaning protocols and promotes a clean patient environment. The IP65 ingress barrier door provides a seal against dust, dirt and moisture and provides easier maintenance. The shielded lamp design of the medical light fixtures keeps the lamp from retaining dust. For superior cleaning and protection, the optional ingress barrier seals the light and protects the patient environment from lingering dust or particulate matter.
Easy To Install — The simple, robust one piece medical lighting system is designed for lay-in and hard ceilings. Additionally the medical light fixtures drop into a tee grid for easy installation.