High illumination for your care environment
The Integris® light solutions, Lite Rail and Specialite bathe the patient room in bright, warm fluorescent light. With a body frame made from extruded aluminum with die-cast end caps, the Integris patient light is housed in a high-impact acrylic lens.
The patient light is equipped with an emergency shut-off switch that cuts off power to the bed when an IV pole or other equipment makes contact with the light, helping you avoid costly repairs to the wall or medical equipment.
An accessory Lite Rail can provide additional electrical outlets to manage medical equipment located near the bed. The care environment can be further enhanced by a Specialite, which features decorative laminate color panel inserts that may be changed to suit the color scheme of the patient room.
Soothing image lightboxes for the healing environment
Photographic scenes are welcome additions to many areas in hospital settings. Patient rooms, treatment areas, and pre/post-operative areas are perfect settings for soothing hospital lighting and images such as coastal, sky, and other nature scenes. The images create a peaceful ambiance that helps patients focus on thoughts connected with pleasant experiences.
In addition to encouraging positive attitudes in patients, hospital lighting and photographic scenes can also create a serene setting for patients’ family and friends in areas such as cafeterias, entryways, and chapels. Healthcare providers and hospital staff also appreciate and benefit from the uplifting hospital lighting and images while at work.
Featuring the same outstanding hospital lighting and environmental performance as our other Patient Environment hospital light fixtures, Hill-Rom® Lightboxes can be specified with complete confidence in virtually any hospital environment. Hill-Rom® Lightbox fixtures produce the highest quality uniform lighting that brings the best out of any graphic image. All hospital lighting fixtures are also available with full range dimming capabilities down to 1% light output which makes them appropriate for 24/7 usage.
Designed to resist contamination
All Hill-Rom Lightboxes are ingress protection rated by Underwriter Laboratories (IP65), National Sanitation Listed (Splash Zone), and NSF49 rated. Additionally Hill-Rom’s hospital light fixtures comes standard with an antimicrobial finish that resists surface contamination.
Easy to install, easy to maintain
The simple, robust one piece hospital lighting unit is designed for lay-in and hard ceilings. The Hill-Rom Lightbox drops into a tee grid for easy installation. The hospital light fixture’s “easy access” design makes changing the graphic image panels a snap, so you’re always keeping a “fresh” look throughout your facility.
Lighting systems for patient rooms
There are a number of reasons you might seek a ceiling mounted overbed lighting solution. Perhaps you need space on a headwall for accessories or equipment, maybe you need to protect your lighting from the “up/down” travel of today’s high-tech bed solutions or perhaps you’ve employed an ergonomic boom arm solution such as our Latitude system. Regardless of the reason, the Hill-Rom OverBed Light has you covered.
Clean, brilliant light delivered in a thoughtful overbed lighting solution that meets the needs of patients, clinicians and hospital engineering departments everywhere.
Clean, Brilliant Light — Glare-free light delivered to the patient care arena where you need it and as you need it. With three lights in one thoughtfully designed fixture, the OverBed Light integrates easily into your room planning and saves money by consolidating your lighting needs into one centrally located fixture. The optional low voltage controller can be mounted on the hospital overbed lighting fixture to facilitate patient control of ambient / reading illumination with a bed or pillow speaker. Healthcare providers can have easy control access at the wall or bed.
Three Function Task Lighting — The Hill-Rom OverBed Light provides patient reading, room ambient and patient examination lighting in one fixture. The OverBed Light features an optional chart and LED nightlight, which is why you often hear this overbed light referred to as the “five function” light.
Easy To Clean and Service — The OverBed Light has an antimicrobial polyester powder coating that stands up to toughest cleaning protocols and promotes a clean patient environment. The IP65 ingress barrier door, seals against dust, dirt and moisture and provides easier maintenance. The shielded lamp design of the OverBed Light keeps the lamp from retaining dust. For superior cleaning and protection, the optional ingress barrier seals the light and protects the patient environment from lingering dust or particulate matter.
Easy To Install — The simple, robust one piece hospital overbed lighting unit is designed for lay-in and hard ceilings. It drops into a tee grid for easy installation.
Glare-free light for the patient care environment
The Hill-Rom Task Light is a recessed, ceiling-mounted medical lighting system designed to brilliantly illuminate the patient care arena. The hospital lighting system is intended to be used in combination with ambient and/or reading light.
With the medical light fixtures installed in pairs on either side of the bed and featuring high output T5 lamp technology and two lamps per fixture, the Hill-Rom task light easily generates more light than any ceiling mounted “5-in-1” type solution.
Asymmetric light distribution technology provides even head-to-toe illumination and because of the dual light configuration, care giver shadows are virtually eliminated.
Clean, Brilliant Light — Abundant glare-free light delivered to the patient care arena where you need it and as you need it.
Easy To Clean and Service — Hill-Rom’s hospital lighting system, the Task Light, comes standard with an antimicrobial polyester powder coating that stands up to toughest cleaning protocols and promotes a clean patient environment. The IP65 ingress barrier door provides a seal against dust, dirt and moisture and provides easier maintenance. The shielded lamp design of the medical light fixtures keeps the lamp from retaining dust. For superior cleaning and protection, the optional ingress barrier seals the light and protects the patient environment from lingering dust or particulate matter.
Easy To Install — The simple, robust one piece medical lighting system is designed for lay-in and hard ceilings. Additionally the medical light fixtures drop into a tee grid for easy installation.
Wall-lighting for today’s hospitality-inspired patient spaces
The hospital Valence Light from Hill-Rom is a wall mounted light with a distinctive, yet traditional design ideal for hospital wall lighting in today’s hospitality-inspired patient spaces.
Clean, Brilliant Light — Abundant, glare-free hospital wall lighting delivered through upper and lower lamps designed to deliver ambient and patient reading light.
Easy To Clean — The hospital Valence Light has optional antimicrobial polyester powder coating that stands up to toughest cleaning protocols and promotes a clean patient environment.
Energy Efficient — Designed to accommodate today’s super-efficient ballasts, the Valence hospital Light fixtures from Hill-Rom helps you contribute to controlling energy costs.